Untuk mempermudah penulisan dan kemalasan admin sistem jaringan dalam mengontrol file log. Buatlah alias pada bash untuk mempermudahnya.
Misal :
Bosan menulis :
tail -f /var/log/syslog
atau
less /var/log/messages
?
Jika malas menulisnya, maka buatlah dengan alias. Letakkan baris perintah berikut ini ke /root/.bashrc
alias tslog='/usr/bin/tail /var/log/syslog'
alias lslog='/usr/bin/less /var/log/syslog'
alias tmsg='/usr/bin/tail /var/log/messages'
alias lmsg='/usr/bin/less /var/log/messages'
alias tauth='/usr/bin/tail /var/log/auth.log'
alias lauth='/usr/bin/less /var/log/auth.log'
alias tmail='/usr/bin/tail /var/log/mail/info'
alias lmail='/usr/bin/less /var/log/mail/info'
alias tkern='/usr/bin/tail /var/log/kernel/info'
alias lkern='/usr/bin/less /var/log/kernel/info'
alias thacc='/usr/bin/tail /var/log/httpd/access_log'
alias lhacc='/usr/bin/less /var/log/httpd/access_log'
alias therr='/usr/bin/tail /var/log/httpd/error_log'
alias lherr='/usr/bin/less /var/log/httpd/error_log'
alias thsacc='/usr/bin/tail /var/log/httpd/ssl-access_log'
alias lhsacc='/usr/bin/less /var/log/httpd/ssl-access_log'
alias thserr='/usr/bin/tail /var/log/httpd/ssl-error_log'
alias lhserr='/usr/bin/less /var/log/httpd/ssl-error_log'
alias tsmb='/usr/bin/tail /var/log/samba/log.smbd'
alias lsmb='/usr/bin/less /var/log/samba/log.smbd'
alias tnmb='/usr/bin/tail /var/log/samba/log.nmbd'
alias lnmb='/usr/bin/less /var/log/samba/log.nmbd'
alias urpmi='nice -n 15 urpmi ––split-level 10 ––split-length 8'
alias rpm='nice -n 15 rpm'
alias make='nice -n 16 make'
Alias-alias ini menjadi perintah baru setelah anda login kembali. Jika anda tidak sabar, ketik satu-satu pada prompt supaya alias tersebut bisa digunakan langsung. Pelajari bagaimana perintah baru ini dan administrasi sistem akan lebih mudah.
23 March 2006
Mandriva - Konfigurasi Teratur
File Konfigurasi
Sulit mengingat dimana letak file konfigurasi layanan yang sedang berjalan?
Maka teraturlah! buat direktori /root/config, sub-directori untuk tiap layanan yang berjalan, dan symlinks untuk file konfigurasi:
Contohnya, sebagai root:
mkdir /root/config
cd /root/config
mkdir samba apache dns network cups sasl rsync
cd samba
ln -s /etc/samba/smb.conf
ln -s /etc/samba/smbusers
ln -s /etc/lmhosts
cd /root/config/apache
ln -s /etc/httpd/conf/httpd2.conf
ln -s /etc/httpd/conf/commonhttpd.conf
ln -s /etc/httpd/conf/vhosts/Vhosts.conf
cd /root/config/dns
ln -s /etc/hosts
ln -s /etc/resolv.conf
ln -s /var/named/named.ca
ln -s /etc/named.conf
ln -s /etc/networks
ln -s /var/named/localhost
cd /root/config/network
ln -s /etc/sysconfig/network-scripts/ifcfg-eth0
ln -s /etc/sysconfig/network-scripts/ifcfg-eth1
ln -s /etc/services
Sekarang semuanya konfigurasi layanan diletakkan pada satu tempat. Dengan menggunakan editor buatlah file backup , dengan diawali ‘~~’, jika tidak menginginkan.
Sulit mengingat dimana letak file konfigurasi layanan yang sedang berjalan?
Maka teraturlah! buat direktori /root/config, sub-directori untuk tiap layanan yang berjalan, dan symlinks untuk file konfigurasi:
Contohnya, sebagai root:
mkdir /root/config
cd /root/config
mkdir samba apache dns network cups sasl rsync
cd samba
ln -s /etc/samba/smb.conf
ln -s /etc/samba/smbusers
ln -s /etc/lmhosts
cd /root/config/apache
ln -s /etc/httpd/conf/httpd2.conf
ln -s /etc/httpd/conf/commonhttpd.conf
ln -s /etc/httpd/conf/vhosts/Vhosts.conf
cd /root/config/dns
ln -s /etc/hosts
ln -s /etc/resolv.conf
ln -s /var/named/named.ca
ln -s /etc/named.conf
ln -s /etc/networks
ln -s /var/named/localhost
cd /root/config/network
ln -s /etc/sysconfig/network-scripts/ifcfg-eth0
ln -s /etc/sysconfig/network-scripts/ifcfg-eth1
ln -s /etc/services
Sekarang semuanya konfigurasi layanan diletakkan pada satu tempat. Dengan menggunakan editor buatlah file backup , dengan diawali ‘~~’, jika tidak menginginkan.
18 March 2006
Cisco 1601 Fast
username :
cisco>enable
password:
cisco#
cisco#conf term
cisco#int eth0
cisco#ip addre 1.1.1.1 ....
dst
cisco#int ser0
cisco#ip addre .......
cisco#no shut
dst...
exit
cisco#ip route 0.0.0.0 0.0.0.0 ser0
exit
dst
selesai deh...
gampang kan ???
cisco>enable
password:
cisco#
cisco#conf term
cisco#int eth0
cisco#ip addre 1.1.1.1 ....
dst
cisco#int ser0
cisco#ip addre .......
cisco#no shut
dst...
exit
cisco#ip route 0.0.0.0 0.0.0.0 ser0
exit
dst
selesai deh...
gampang kan ???
08 March 2006
Mandriva - Dasar
Dasar
Topik:
Bagian Lainnya: Administrasi Koneksitas Hardware Instalasi Sumber lain Keamanan Pemecahan Masalah Program dan Aplikasi X
Dokumentasi
Di dunia yang ideal, anda tidak memerlukan dokumentasi. Tetapi seperti biasa, anda harus tau dimana menemukannya melalui dokumentasi yang ada.
Halaman Dua :Halaman Tiga :
Direktori dan File
Struktur Sistem File pada Linux
Tersesat pada direktori asing Standar Hirarki sistem File ? Halaman ini memberikan petunjuk kepada anda bagaimana menemukan file pada sebuah direktori.
Halaman Dua :Halaman Tiga :
Halaman Empat :
Pengertian tentang Perijinan / Permission
Permision adalah atribut pada sebuah file. Pelajari kenapa hal tersebut disini, kenapa dan bagaimana menggunakan permision / perijinan file tersebut.
Halaman Dua :Mmenginstal Perangkat Lunak / Software
Dari RPM
RPM adalah paket software yang digunakan untuk memeprmudah proses instalasi, uninstal dan pengaturan software . Dianjurkan menggunakan 'urpmi' atau melalui Mandrake Control Center untuk menginstall software, agar instalasi software yang menggunakan ketergantungan paket lainnya lebih mudah.
Halaman Dua :Halaman Tiga :
- urpmi - Gaya RPM Mandriva
- Mengkonfigurasi urpmi
- Menggunakan rpmdrake
- Menggunakan urpmi
Halaman Lima :(Contributed by Kevin Masaryk, edited)
- Pengenalan
- "Saya kehilangan semuanya: sumber media, grup install, dan griup uninstall ."
- "Saya mendapatkan pesan kesalahan ketika mencari RPM baru setelah memperbarui media."
- "Saya telah menambahkan media CD tetapi RPM tidak bisa muncul."
- "rpmdrake menampilkan daftar salinan yang sama tiap paketnya."
Dari kode sumber
Ingin yang lebih? Kompilasi sendiri1.1 Halaman ini menerangkan bagaimana caranya.
Page One :
Page Three (FAQ):
Other
Handling third party (Adobe, Netscape) installers.
Installing Non-RPM Programs {May 21, 02}
Using The Shell
These pages introduce and explain basic shell commands and mechanisms.
Halaman Dua :- Auto-Completion
- Histori Commandline / Perintah
- Menyunting Commandline / Perintah
- Jalan pintas Shell yg tersedia
Halaman Empat :
Halaman Lima :
Halaman Enam :
Mandriva - Mendapatkan Bantuan
Mendapatkan bantuan dalam Mengkonfigurasi, Menggunakan, Merawat Linux Mandriva
Dokumentasi
- Dokumentasi Online : http://www.mandrivalinux.com/en/fdoc.php3
- Dokumentasi Resmi
Dokumentasi tidak resmi berisikan informasi umum mengenai semua distribusi linux pada umunya.
Bantuan Online, Forum & Mailing lists
- Mailing lists http://www.mandrivalinux.com/en/flists.php3
- Arsip http://archives.mandrivalinux.com/
- Forum
- Forum Mandriva Club
- Bahasa Inggris: Mandrivausers
- Linuxquestions
- Bahasa Jerman: WCM , Mandrivauser.de
- Bahasa Perancis: Hardware.fr
- Bahasa Belanda: Mandrakeclub.nl
- Wiki : The Mandrakelinux Development Community Wiki (Cooker)
- Laporan Bug : Dev version (Cooker) http://qa.mandriva.com/
Dukungan Komersial Mandriva
Pelatihan Linux
Link dan Tutorial yg berguna
- the MandrakeUserNet ring
- URPMI wiki
- Konfigurasi mudah instalasi dan update software - EASYURPMI
- http://myweb.tiscali.co.uk/eggnbacon/docs/urpmi-howto/index.html
- http://www.cs.utexas.edu/users/walter/geek/rpm-howto.html
- Mengkonfigurasi dan Menginstall software pada Linux Mandriva
- Tip konfigurasi dan instalasi Mandriva
- Cari Linux di Google
- Screen shot bagaimana mencobanya Linuxloader
Ahli Mandriva
Administrasi dan Software Server
Administrasi dan Software Server
- 1 Menjadi 'root'
- 2 Backup
- 3 Pembetulan keadaan Darurat
- 4 Pengaturan Proses
- 5 Mounting
- 6 Penjadwalan
- 7 Layanan Sistem
- 8 Lebih Teratur
- 9 Alias pada Bash
Menjadi 'root'
'root' adalah akun paling powerfull dalam sistem Linux. Pelajari bagaimana menggunakan akun root dengan seksama.- Pengenalan dengan 'root'
- Menggunakan akun 'root' Considered Harmful
- Pekerjaan apa saja yang membutuhkan akun 'root'
- Menajdi 'root' Dengan 'su'
- 'su' Dengan mode Grafis: 'kdesu'
- 'su' nyaman dengan: 'sudo'
Backup
Anda dianjurkan membackup file data sebelum melangkah lebih lanjut. Biasanya, tiap pengguna menyimpan file data pada direktori /home masing-masing. Semua file konfigurasi administrasi umum disimpan di /etc dan hanya dapat diubah oleh root.Program untuk membackup:- dengan perintah tar
- dengan perintah dd (device dump)
- partimage … menyimpan semua jenis partisi Ext2FS, ReiserFS, NTFS and FAT32 - Ini sangat berguna ketika menginstall software aplikasi pada banyak komputer: tinggal menginstall salah satu komputer, membuat image, dan salin image tersebut ke semua komputer yang ada. Kemudian, setelah langkah pertama, masing-masing instalasi yang akan dibuat secara otomatis, dan hanya membutuhkan waktu yang singkat.
Pembetulan keadaan Darurat
Bagaimana mengatasi kesalahan sistem yang ada.- Instalasi Ulang vs Penyelamatan
- Program Dasar Penyelamatan
- Sistem Penyelamat Linux MAndriva
- Mem-boot dengan 'failsafe'
- Mode Pengguna Tunggal / Mode Single User
- Shell root
- Sistem Linux dengan Media Lain
- Skenario I: Sistem tidak bisa Boot
- Skenario II: Sistem Berhenti Boot
- Skenario III: Gagal Login
- Skenario IV: Sistem Hang pada saat masuk ke X
- Skenario V: Sistem Macet / Freeze
- Skenario VI: File Penting Terhapus
Pengaturan Proses
Hampir semua di Linux adalah sebuah Proses. Lihat apa dan bagaimana mengatur proses-proses tersebut.- Pengenalan Proses
- Monitor Proses
- Detil Proses
- Penghitungan Proses
- Estimasi Penggunaan Sumber Proses
- Setting Batasan Sumber
- Kesepakatan dengan Proses Jahat
Mounting
Bagaimana meng-handle sistem file di Linux.- Kenapa Linux meng-Handle Media secara Berbeda
- Setup mount standar pada Linux Mandriva
- Detil Mounting
- Menulis NTFS Windows
- Penggunaan 'fstab'
- Penjelasan isi 'fstab'
- Menggunakan 'supermount'
- "maximal mount count reached - check forced"
- "device was not cleanly unmounted on shutdown - check forced"
- "mount: only root can do that"
- Tutup CD-Rom tidak bisa dibuka
- 'df' tidak lagi menampilkan media eksternal
- "mount: can't find /mnt/{device} in /etc/fstab or /etc/mtab"
- '{device} is not a valid blockdevice'
- CD Audio Tidak bisa dimainkan setelah diMount
- "input/output error"
- No Proper Unmounting ('Device Busy')
- Akses tidak bisa pada Partisi Windows yang di Mount
- Masalah Mounting Removable Media Dengan File Sistem yang berbeda
- Persiapan
- Membuat Mount Points
- Mengkonfigurasi File autofs di /etc
- Ikon di Desktop untuk akses lebih mudah
Penjadwalan
Bagaimana menggunakan komputer agar mengerjakan sesuatu pada waktu tertentu.- Apa yang bisa di kerjakan dengan Penjadwalan
- 'sleep', 'at', 'cron' dan 'anacron'
- 'sleep'
- 'at'
- Membuat Waktu Eksekusi
- Menulis Crontab sendiri
- Contoh : Kompresi Folder 'sent_mail' tiap bulan
- anacron
- Penjadwalan secara Interaktif
Layanan Sistem
Layanan Sistem: apa dan bagaimana mengontrolnya.- Pengenalan Layanan Sistem
- Mekanisme Layanan tingak lanjut
- DrakXServices
- Bagaimana Layanan Bekerja
- Daftar Layanan Umum (a-h)
- Daftar Layanan Umum (i-n)
- Daftar Layanan Umum (o-y)
- Deprecated Services
Lebih Teratur
File Konfigurasi
Apakah anda pernah mengalami kesulitan mengingat dimana letak file konfigurasi layanan yang sedang berjalan?
Maka teratirlah. buat direktori /root/config, sub-directori untuk tiap layanan yang berjalan, dan symlinks untuk file konfigurasi:Contohnya, sebagai root:
mkdir /root/config
cd /root/config
mkdir samba apache dns network cups sasl rsynccd samba
ln -s /etc/samba/smb.conf
ln -s /etc/samba/smbusers
ln -s /etc/lmhostscd /root/config/apache
ln -s /etc/httpd/conf/httpd2.conf
ln -s /etc/httpd/conf/commonhttpd.conf
ln -s /etc/httpd/conf/vhosts/Vhosts.confcd /root/config/dns
ln -s /etc/hosts
ln -s /etc/resolv.conf
ln -s /var/named/named.ca
ln -s /etc/named.conf
ln -s /etc/networks
ln -s /var/named/localhostcd /root/config/network
ln -s /etc/sysconfig/network-scripts/ifcfg-eth0
ln -s /etc/sysconfig/network-scripts/ifcfg-eth1
ln -s /etc/services
Alias pada Bash
Apakah anda bosan menulis
tail /var/log/syslogless /var/log/messagesDaripada Malas1.1 Buatlah dengan alias. Letakkan baris berikut pada /root/.bashrc.
alias tslog='/usr/bin/tail /var/log/syslog'
alias lslog='/usr/bin/less /var/log/syslog'
alias tmsg='/usr/bin/tail /var/log/messages'
alias lmsg='/usr/bin/less /var/log/messages'
alias tauth='/usr/bin/tail /var/log/auth.log'
alias lauth='/usr/bin/less /var/log/auth.log'
alias tmail='/usr/bin/tail /var/log/mail/info'
alias lmail='/usr/bin/less /var/log/mail/info'
alias tkern='/usr/bin/tail /var/log/kernel/info'
alias lkern='/usr/bin/less /var/log/kernel/info'
alias thacc='/usr/bin/tail /var/log/httpd/access_log'
alias lhacc='/usr/bin/less /var/log/httpd/access_log'
alias therr='/usr/bin/tail /var/log/httpd/error_log'
alias lherr='/usr/bin/less /var/log/httpd/error_log'
alias thsacc='/usr/bin/tail /var/log/httpd/ssl-access_log'
alias lhsacc='/usr/bin/less /var/log/httpd/ssl-access_log'
alias thserr='/usr/bin/tail /var/log/httpd/ssl-error_log'
alias lhserr='/usr/bin/less /var/log/httpd/ssl-error_log'
alias tsmb='/usr/bin/tail /var/log/samba/log.smbd'
alias lsmb='/usr/bin/less /var/log/samba/log.smbd'
alias tnmb='/usr/bin/tail /var/log/samba/log.nmbd'
alias lnmb='/usr/bin/less /var/log/samba/log.nmbd'
alias urpmi='nice -n 15 urpmi ––split-level 10 ––split-length 8'
alias rpm='nice -n 15 rpm'
alias make='nice -n 16 make'
Alias-alias ini menjadi perintah baru setelah anda login kembali. Jika anda tidak sabar, ketik satu-satu pada prompt supaya alias tersebut bisa digunakan langsung. Pelajari bagaimana perintah baru ini dan administrasi sistem akan lebih mudah.
04 March 2006
Konfigurasi - Iptables
# Generated by iptables-save v1.2.9 on Mon Feb 20 15:34:03 2006
*filter
:INPUT ACCEPT [54445800:23826333200]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [62795642:29017166036]
[0:0] -A INPUT -s 222.124.30.84 -p tcp -m multiport --dports 80,3128,222 -j ACCEPT
[0:0] -A INPUT -s 222.124.30.84 -p udp -m multiport --dports 80,3128,222 -j ACCEPT
[0:0] -A INPUT -s 203.130.255.196 -p tcp -m multiport --dports 80,222 -j ACCEPT
[0:0] -A INPUT -s 222.124.45.215 -j DROP
[0:0] -A INPUT -s 202.162.218.193 -j DROP
[0:0] -A INPUT -s 204.10.31.12 -j DROP
[0:0] -A INPUT -s 203.130.237.155 -j DROP
[0:0] -A INPUT -s 202.53.243.42 -j DROP
[0:0] -A INPUT -s 200.161.16.189 -j DROP
[0:0] -A INPUT -s 203.128.81.26 -j DROP
[53:2600] -A INPUT -i eth0 -p tcp -m multiport --dports 135,137,138,139,445,143,10000,4559,111,3128,80,23 -j DROP
[61:6751] -A INPUT -i eth0 -p udp -m multiport --dports 135,137,138,139,445,143,4559,111,3128,10000,80,23 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 199,3632,222,81,3130,110 -j DROP
[9:1021] -A INPUT -i eth0 -p udp -m multiport --dports 199,3632,222,81,3130,110 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 3312,3412,3512,1215,1315,4661,4672,5555,4242,3306,2323 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 7778,1863,6346,6257,6699,4661,4672,1214,6881,6889 -j DROP
[0:0] -A INPUT -i eth0 -p udp -m multiport --dports 4661,4672,6881,6889,1214,4661,4672,6257,6699,6346,3312,3412,3512,1215,1315 -j DROP
[0:0] -A INPUT -i eth1 -p tcp -m multiport --dports 135,137,138,139,113 -j DROP
[589:70987] -A INPUT -i eth1 -p udp -m multiport --dports 135,137,138,139,113 -j DROP
[76333:14307628] -A INPUT -i eth1 -j ACCEPT
[0:0] -A INPUT -m iprange --src-range 10.10.10.100-10.10.10.200 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.201-10.10.10.233 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.235-10.10.10.254 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.32-10.10.10.99 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.21-10.10.10.30 -j DROP
[15510367:3346522673] -A FORWARD -i ! eth0 -o eth0 -j ACCEPT
[14265281:4511345821] -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
[0:0] -A FORWARD -f -j ACCEPT
#[0:0] -A FORWARD -o eth1 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A FORWARD -o eth0 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A FORWARD -o eth0 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A OUTPUT -o eth1 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
# Generated by iptables-save v1.2.9 on Mon Feb 20 15:34:03 2006
*mangle
:PREROUTING ACCEPT [84465749:31710532148]
:INPUT ACCEPT [54611282:23847630554]
:FORWARD ACCEPT [29775648:7857868494]
:OUTPUT ACCEPT [62796270:29017241181]
:POSTROUTING ACCEPT [93021182:36884094955]
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
# Generated by iptables-save v1.2.9 on Mon Feb 20 15:34:03 2006
*nat
:PREROUTING ACCEPT [844595:65841060]
:POSTROUTING ACCEPT [35876:2688756]
:OUTPUT ACCEPT [1728235:105494341]
[1236:59328] -A PREROUTING -s 10.10.10.0/255.255.255.0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.10.10.1:81
[0:0] -A PREROUTING -s 10.10.10.0/255.255.255.0 -p udp -m udp --dport 80 -j DNAT --to-destination 10.10.10.1:81
[0:0] -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 3128
[185790:11017927] -A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
*filter
:INPUT ACCEPT [54445800:23826333200]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [62795642:29017166036]
[0:0] -A INPUT -s 222.124.30.84 -p tcp -m multiport --dports 80,3128,222 -j ACCEPT
[0:0] -A INPUT -s 222.124.30.84 -p udp -m multiport --dports 80,3128,222 -j ACCEPT
[0:0] -A INPUT -s 203.130.255.196 -p tcp -m multiport --dports 80,222 -j ACCEPT
[0:0] -A INPUT -s 222.124.45.215 -j DROP
[0:0] -A INPUT -s 202.162.218.193 -j DROP
[0:0] -A INPUT -s 204.10.31.12 -j DROP
[0:0] -A INPUT -s 203.130.237.155 -j DROP
[0:0] -A INPUT -s 202.53.243.42 -j DROP
[0:0] -A INPUT -s 200.161.16.189 -j DROP
[0:0] -A INPUT -s 203.128.81.26 -j DROP
[53:2600] -A INPUT -i eth0 -p tcp -m multiport --dports 135,137,138,139,445,143,10000,4559,111,3128,80,23 -j DROP
[61:6751] -A INPUT -i eth0 -p udp -m multiport --dports 135,137,138,139,445,143,4559,111,3128,10000,80,23 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 199,3632,222,81,3130,110 -j DROP
[9:1021] -A INPUT -i eth0 -p udp -m multiport --dports 199,3632,222,81,3130,110 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 3312,3412,3512,1215,1315,4661,4672,5555,4242,3306,2323 -j DROP
[0:0] -A INPUT -i eth0 -p tcp -m multiport --dports 7778,1863,6346,6257,6699,4661,4672,1214,6881,6889 -j DROP
[0:0] -A INPUT -i eth0 -p udp -m multiport --dports 4661,4672,6881,6889,1214,4661,4672,6257,6699,6346,3312,3412,3512,1215,1315 -j DROP
[0:0] -A INPUT -i eth1 -p tcp -m multiport --dports 135,137,138,139,113 -j DROP
[589:70987] -A INPUT -i eth1 -p udp -m multiport --dports 135,137,138,139,113 -j DROP
[76333:14307628] -A INPUT -i eth1 -j ACCEPT
[0:0] -A INPUT -m iprange --src-range 10.10.10.100-10.10.10.200 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.201-10.10.10.233 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.235-10.10.10.254 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.32-10.10.10.99 -j DROP
[0:0] -A INPUT -m iprange --src-range 10.10.10.21-10.10.10.30 -j DROP
[15510367:3346522673] -A FORWARD -i ! eth0 -o eth0 -j ACCEPT
[14265281:4511345821] -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
[0:0] -A FORWARD -f -j ACCEPT
#[0:0] -A FORWARD -o eth1 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A FORWARD -o eth0 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A FORWARD -o eth0 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
#[0:0] -A OUTPUT -o eth1 -p tcp -m tcp --sport 31337 --dport 31337 -j DROP
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
# Generated by iptables-save v1.2.9 on Mon Feb 20 15:34:03 2006
*mangle
:PREROUTING ACCEPT [84465749:31710532148]
:INPUT ACCEPT [54611282:23847630554]
:FORWARD ACCEPT [29775648:7857868494]
:OUTPUT ACCEPT [62796270:29017241181]
:POSTROUTING ACCEPT [93021182:36884094955]
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
# Generated by iptables-save v1.2.9 on Mon Feb 20 15:34:03 2006
*nat
:PREROUTING ACCEPT [844595:65841060]
:POSTROUTING ACCEPT [35876:2688756]
:OUTPUT ACCEPT [1728235:105494341]
[1236:59328] -A PREROUTING -s 10.10.10.0/255.255.255.0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.10.10.1:81
[0:0] -A PREROUTING -s 10.10.10.0/255.255.255.0 -p udp -m udp --dport 80 -j DNAT --to-destination 10.10.10.1:81
[0:0] -A PREROUTING -i eth1 -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 3128
[185790:11017927] -A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
# Completed on Mon Feb 20 15:34:03 2006
Konfigurasi - Bridge
yah... lupa lagi :(( padahal cuman gini ae
/usr/sbin/brctl addbr br0
# Tambahkan ethernet yg dipake
/usr/sbin/brctl addif br0 eth0
/usr/sbin/brctl addif br0 eth1
# buat ethernet on
/sbin/ifconfig eth0 0.0.0.0
/sbin/ifconfig eth1 0.0.0.0
# kasih IP biar si bridge bisa di kontrol dari luar
/sbin/ifconfig br0 62.3.3.26 netmask 255.255.255.248 broadcast 62.3.3.32
# tambah IP internal buat NAT
ip addr add 192.168.0.1/24 dev br0
/sbin/route add default gw 62.3.3.25
IPTABLES nya
iptables -F FORWARD
iptables -P FORWARD DROP
iptables -A FORWARD -s 0.0.0.0/0.0.0.0 -d 0.0.0.0/0.0.0.0 -m state --state INVALID -j DROP
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
# Limit ICMP
# iptables -A FORWARD -p icmp -m limit --limit 4/s -j ACCEPT
# Match string, a good simple method to block some VIRUS very Quickly
# iptables -I FORWARD -j DROP -p tcp -s 0.0.0.0/0 -m string --string "cmd.exe"
# Blok koneksi MySQL
iptables -A FORWARD -p tcp -s 0/0 -d 62.3.3.0/24 --dport 3306 -j DROP
# Linux Mail Server
#
# FTP-DATA ( 20 ) , FTP ( 21 ) , SSH ( 22 )
iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.27/32 --dport 20:22 -j ACCEPT
# Ijinkan Mail Server konek ke luar
iptables -A FORWARD -p tcp -s 62.3.3.27/32 -d 0/0 -j ACCEPT
# WWW Server
#
# HTTP ( 80 )
iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.28/32 --dport 80 -j ACCEPT
# HTTPS ( 443 )
iptables -A FORWARD -p tcp -s 0.0.0.0/0 -d 62.3.3.28/32 --dport 443 -j ACCEPT
iptables -A FORWARD -p tcp -s 62.3.3.28/32 -d 0/0 -j ACCEPT
sumber:
http://www.linuxsecurity.com/docs/harden-doc/html/securing-debian-howto/ap-bridge-fw.en.html
Konfigurasi - Postfix
master.cf
#
# Postfix master process configuration file. For details on the format
# of the file, see the Postfix master(5) manual page.
#
# The script postfix-chroot.sh can be used to set up a Postfix chroot
# environment on your Mandrivalinux System.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - y - - smtpd
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628 inet n - n - - qmqpd
pickup fifo n - y 60 1 pickup
-o content_filter=
-o receive_override_options=
cleanup unix n - y - 0 cleanup
qmgr fifo n - y 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
tlsmgr unix - - y 1000? 1 tlsmgr
rewrite unix - - y - - trivial-rewrite
bounce unix - - y - 0 bounce
defer unix - - y - 0 bounce
trace unix - - y - 0 bounce
verify unix - - y - 1 verify
flush unix n - y 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - y - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - y - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - y - - showq
error unix - - y - - error
discard unix - - y - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - y - - lmtp
anvil unix - - y - 1 anvil
scache unix - - y - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=nobody argv=/usr/bin/maildrop -d ${recipient}
#
# Cyrus. Please See the Postfix CYRUS_README file for details
#
# deliver interface (deprecated), to use this also use
# postconf -e cyrus-deliver_destination_recipient_limit=1
cyrus-deliver unix - n n - - pipe
user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# for default cyrus socket placement
cyrus unix - n n - - lmtp
-o lmtp_cache_connection=yes
#
# if you configure cyrus socket in the chroot jail
cyrus-chroot unix - - y - - lmtp
-o lmtp_cache_connection=yes
#
# for lmtp to cyrus via tcp
cyrus-inet unix - - y - - lmtp
-o lmtp_cache_connection=yes
-o lmtp_sasl_auth_enable=yes
-o lmtp_sasl_password_maps=hash:/etc/postfix/cyrus_lmtp_sasl_pass
-o lmtp_sasl_security_options=noanonymous
#
# UUCP. Unix to Unix CoPy
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
# These are not distributed with Mandrivalinux
#
#ifmail unix - n n - - pipe
# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#bsmtp unix - n n - - pipe
# flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
##### START OF CONTENT FILTER CUSTOMIZATIONS #####
# Please see the Postfix FILTER_README for details.
# These sample entries expect your content filter to
# listen on port 10025 and to inject mail back into
# postfix on port 10026.
#
# to enable such content filter run the command
# postconf -e content_filter=smtp-filter:127.0.0.1:10025
# postconf -e smtp-filter_destination_concurrency_limit=2
# or
# postconf -e content_filter=lmtp-filter:127.0.0.1:10025
# postconf -e lmtp-filter_destination_concurrency_limit=2
# and the command
# postconf -e receive_override_options=no_address_mappings
#
127.0.0.1:10026 inet n - y - - smtpd
-o content_filter=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o mynetworks=127.0.0.0/8
-o smtpd_authorized_xforward_hosts=127.0.0.0/8
-o strict_rfc821_envelopes=yes
-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
-o smtpd_client_connection_limit_exceptions=127.0.0.0/8
lmtp-filter unix - - y - - lmtp
-o lmtp_data_done_timeout=1200
-o lmtp_send_xforward_command=yes
smtp-filter unix - - y - - smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
#clamsmtpd
scan unix - - n - 16 smtp
-o smtp_send_xforward_command=yes
127.0.0.1:10026 inet n - n - 16 smtpd
-o content_filter=
-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
-o smtpd_helo_restrictions=
-o smtpd_client_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o mynetworks_style=host
-o smtpd_authorized_xforward_hosts=127.0.0.0/8
##### END OF CONTENT FILTER CUSTOMIZATIONS #####
main.cf
# These are only the parameters changed from a default install
# see /etc/postfix/main.cf.dist for a commented, fuller version of this file.
# These are changed by postfix install script
readme_directory = /usr/share/doc/postfix-2.2.5/README_FILES
html_directory = /usr/share/doc/postfix-2.2.5/html
sendmail_path = /usr/sbin/sendmail.postfix
setgid_group = postdrop
command_directory = /usr/sbin
manpage_directory = /usr/share/man
daemon_directory = /usr/lib/postfix
newaliases_path = /usr/bin/newaliases
mailq_path = /usr/bin/mailq
queue_directory = /var/spool/postfix
mail_owner = postfix
# User configurable parameters
inet_interfaces = all
mynetworks = 10.10.10.0/24, 127.0.0.0/8
mynetworks_style = subnet
delay_warning_time = 4h
smtpd_banner = $myhostname ESMTP kampesMail ($mail_version) (Kampes_Komprang)
smtpd_sender_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_helo_required = yes
smtpd_client_restrictions =
reject_rbl_client sbl.spamhaus.org,
reject_rbl_client cbl.abuseat.org,
reject_rbl_client bl.spamcop.net,
reject_rbl_client sbl.spamhaus.org,
reject_rbl_client bl.spamcannibal.org,
reject_rbl_client relays.ordb.org,
reject_rbl_client dnsbl.antispam.or.id,
permit
#inet_interfaces = localhost
#mynetworks_style = host
#delay_warning_time = 4h
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) (Mandriva Linux)
unknown_local_recipient_reject_code = 450
smtp-filter_destination_concurrency_limit = 2
lmtp-filter_destination_concurrency_limit = 2
smtpd_sasl_path = /etc/postfix/sasl:/usr/lib/sasl2
smtpd_error_sleep_time = 60
smtpd_soft_error_limit = 60
smtpd_hard_error_limit = 10
myhostname = hujan.semusim.info
mydomain = semusim.info
myorigin = $mydomain
mydestination = $myhostname localhost.$mydomain $mydomain
owner_request_spesial = no
relay_domains = $mydestination semusim.info
alias_maps = hash:/etc/postfix/aliases
content_filter = scan:127.0.0.1:10025
#receive_override_options = no_address_mappings
clamstpd.conf
# ------------------------------------------------------------------------------
# SAMPLE CLAMSMTPD CONFIG FILE
# ------------------------------------------------------------------------------
#
# - Comments are a line that starts with a #
# - All the options are found below with sample settings
# The address to send scanned mail to.
# This option is required unless TransparentProxy is enabled
OutAddress: 10026
# The maximum number of connection allowed at once.
# Be sure that clamd can also handle this many connections
#MaxConnections: 64
# Amount of time (in seconds) to wait on network IO
#TimeOut: 180
# Keep Alives (ie: NOOP's to server)
#KeepAlives: 0
# Send XCLIENT commands to receiving server
#XClient: off
# Address to listen on (defaults to all local addresses on port 10025)
#Listen: 0.0.0.0:10025
Listen: 127.0.0.1:10025
# The address clamd is listening on
#ClamAddress: /var/run/clamav
ClamAddress: /var/lib/clamav/clamd.socket
# A header to add to all scanned email
Header: X-Virus-Scanned: ClamAV using ClamSMTP
# Directory for temporary files
TempDirectory: /tmp
# Whether or not to bounce email (default is to silently drop)
#Bounce: off
# Whether or not to keep virus files
#Quarantine: off
Quarantine: on
# Enable transparent proxy support
#TransparentProxy: off
# User to switch to
User: clamav
# Virus actions: There's an option to run a script every time a virus is found.
# !IMPORTANT! This can open a hole in your server's security big enough to drive
# farm vehicles through. Be sure you know what you're doing. !IMPORTANT!
#VirusAction: /path/to/some/script.sh
#
# Postfix master process configuration file. For details on the format
# of the file, see the Postfix master(5) manual page.
#
# The script postfix-chroot.sh can be used to set up a Postfix chroot
# environment on your Mandrivalinux System.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - y - - smtpd
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628 inet n - n - - qmqpd
pickup fifo n - y 60 1 pickup
-o content_filter=
-o receive_override_options=
cleanup unix n - y - 0 cleanup
qmgr fifo n - y 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
tlsmgr unix - - y 1000? 1 tlsmgr
rewrite unix - - y - - trivial-rewrite
bounce unix - - y - 0 bounce
defer unix - - y - 0 bounce
trace unix - - y - 0 bounce
verify unix - - y - 1 verify
flush unix n - y 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - y - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - y - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - y - - showq
error unix - - y - - error
discard unix - - y - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - y - - lmtp
anvil unix - - y - 1 anvil
scache unix - - y - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=nobody argv=/usr/bin/maildrop -d ${recipient}
#
# Cyrus. Please See the Postfix CYRUS_README file for details
#
# deliver interface (deprecated), to use this also use
# postconf -e cyrus-deliver_destination_recipient_limit=1
cyrus-deliver unix - n n - - pipe
user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# for default cyrus socket placement
cyrus unix - n n - - lmtp
-o lmtp_cache_connection=yes
#
# if you configure cyrus socket in the chroot jail
cyrus-chroot unix - - y - - lmtp
-o lmtp_cache_connection=yes
#
# for lmtp to cyrus via tcp
cyrus-inet unix - - y - - lmtp
-o lmtp_cache_connection=yes
-o lmtp_sasl_auth_enable=yes
-o lmtp_sasl_password_maps=hash:/etc/postfix/cyrus_lmtp_sasl_pass
-o lmtp_sasl_security_options=noanonymous
#
# UUCP. Unix to Unix CoPy
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
# These are not distributed with Mandrivalinux
#
#ifmail unix - n n - - pipe
# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#bsmtp unix - n n - - pipe
# flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
##### START OF CONTENT FILTER CUSTOMIZATIONS #####
# Please see the Postfix FILTER_README for details.
# These sample entries expect your content filter to
# listen on port 10025 and to inject mail back into
# postfix on port 10026.
#
# to enable such content filter run the command
# postconf -e content_filter=smtp-filter:127.0.0.1:10025
# postconf -e smtp-filter_destination_concurrency_limit=2
# or
# postconf -e content_filter=lmtp-filter:127.0.0.1:10025
# postconf -e lmtp-filter_destination_concurrency_limit=2
# and the command
# postconf -e receive_override_options=no_address_mappings
#
127.0.0.1:10026 inet n - y - - smtpd
-o content_filter=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o mynetworks=127.0.0.0/8
-o smtpd_authorized_xforward_hosts=127.0.0.0/8
-o strict_rfc821_envelopes=yes
-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
-o smtpd_client_connection_limit_exceptions=127.0.0.0/8
lmtp-filter unix - - y - - lmtp
-o lmtp_data_done_timeout=1200
-o lmtp_send_xforward_command=yes
smtp-filter unix - - y - - smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes
#clamsmtpd
scan unix - - n - 16 smtp
-o smtp_send_xforward_command=yes
127.0.0.1:10026 inet n - n - 16 smtpd
-o content_filter=
-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
-o smtpd_helo_restrictions=
-o smtpd_client_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,reject
-o mynetworks_style=host
-o smtpd_authorized_xforward_hosts=127.0.0.0/8
##### END OF CONTENT FILTER CUSTOMIZATIONS #####
main.cf
# These are only the parameters changed from a default install
# see /etc/postfix/main.cf.dist for a commented, fuller version of this file.
# These are changed by postfix install script
readme_directory = /usr/share/doc/postfix-2.2.5/README_FILES
html_directory = /usr/share/doc/postfix-2.2.5/html
sendmail_path = /usr/sbin/sendmail.postfix
setgid_group = postdrop
command_directory = /usr/sbin
manpage_directory = /usr/share/man
daemon_directory = /usr/lib/postfix
newaliases_path = /usr/bin/newaliases
mailq_path = /usr/bin/mailq
queue_directory = /var/spool/postfix
mail_owner = postfix
# User configurable parameters
inet_interfaces = all
mynetworks = 10.10.10.0/24, 127.0.0.0/8
mynetworks_style = subnet
delay_warning_time = 4h
smtpd_banner = $myhostname ESMTP kampesMail ($mail_version) (Kampes_Komprang)
smtpd_sender_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_helo_required = yes
smtpd_client_restrictions =
reject_rbl_client sbl.spamhaus.org,
reject_rbl_client cbl.abuseat.org,
reject_rbl_client bl.spamcop.net,
reject_rbl_client sbl.spamhaus.org,
reject_rbl_client bl.spamcannibal.org,
reject_rbl_client relays.ordb.org,
reject_rbl_client dnsbl.antispam.or.id,
permit
#inet_interfaces = localhost
#mynetworks_style = host
#delay_warning_time = 4h
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) (Mandriva Linux)
unknown_local_recipient_reject_code = 450
smtp-filter_destination_concurrency_limit = 2
lmtp-filter_destination_concurrency_limit = 2
smtpd_sasl_path = /etc/postfix/sasl:/usr/lib/sasl2
smtpd_error_sleep_time = 60
smtpd_soft_error_limit = 60
smtpd_hard_error_limit = 10
myhostname = hujan.semusim.info
mydomain = semusim.info
myorigin = $mydomain
mydestination = $myhostname localhost.$mydomain $mydomain
owner_request_spesial = no
relay_domains = $mydestination semusim.info
alias_maps = hash:/etc/postfix/aliases
content_filter = scan:127.0.0.1:10025
#receive_override_options = no_address_mappings
clamstpd.conf
# ------------------------------------------------------------------------------
# SAMPLE CLAMSMTPD CONFIG FILE
# ------------------------------------------------------------------------------
#
# - Comments are a line that starts with a #
# - All the options are found below with sample settings
# The address to send scanned mail to.
# This option is required unless TransparentProxy is enabled
OutAddress: 10026
# The maximum number of connection allowed at once.
# Be sure that clamd can also handle this many connections
#MaxConnections: 64
# Amount of time (in seconds) to wait on network IO
#TimeOut: 180
# Keep Alives (ie: NOOP's to server)
#KeepAlives: 0
# Send XCLIENT commands to receiving server
#XClient: off
# Address to listen on (defaults to all local addresses on port 10025)
#Listen: 0.0.0.0:10025
Listen: 127.0.0.1:10025
# The address clamd is listening on
#ClamAddress: /var/run/clamav
ClamAddress: /var/lib/clamav/clamd.socket
# A header to add to all scanned email
Header: X-Virus-Scanned: ClamAV using ClamSMTP
# Directory for temporary files
TempDirectory: /tmp
# Whether or not to bounce email (default is to silently drop)
#Bounce: off
# Whether or not to keep virus files
#Quarantine: off
Quarantine: on
# Enable transparent proxy support
#TransparentProxy: off
# User to switch to
User: clamav
# Virus actions: There's an option to run a script every time a virus is found.
# !IMPORTANT! This can open a hole in your server's security big enough to drive
# farm vehicles through. Be sure you know what you're doing. !IMPORTANT!
#VirusAction: /path/to/some/script.sh
Konfigurasi - Squid
http_port 10.10.10.1:81
http_port 3128
icp_port 3130
udp_incoming_address 0.0.0.0
udp_outgoing_address 255.255.255.255
#cache_peer 203.130.255.196 parent 3128 3130
cache_peer random.us.ircache.net sibling 3128 3130 login=cs-info@plasa.com:phowEfalsajrasu
#cache_peer 202.143.61.37 sibling 3128 3130 proxy-only
icp_query_timeout 0
maximum_icp_query_timeout 2000
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 8 MB
cache_swap_low 98
cache_swap_high 99
maximum_object_size 51200 KB
minimum_object_size 0 KB
maximum_object_size_in_memory 16 KB
ipcache_size 4096
ipcache_low 98
ipcache_high 99
fqdncache_size 1024
cache_replacement_policy heap LFUDA
memory_replacement_policy heap GDSF
cache_dir aufs /var/spool/squid 10000 32 256
cache_access_log /var/log/squid/access.log
cache_log /var/log/squid/cache.log
cache_store_log /var/log/squid/store.log
emulate_httpd_log on
log_ip_on_direct on
mime_table /etc/squid/mime.conf
pid_filename /var/run/squid.pid
debug_options ALL,1
log_fqdn off
client_netmask 255.255.255.255
ftp_user Squid@kates.com
ftp_list_width 48
ftp_passive on
ftp_sanitycheck on
ftp_telnet_protocol on
#cache_dns_program /usr/lib/squid/dnsserver
dns_timeout 5 minutes
dns_nameservers 10.10.10.1 202.134.1.10 61.94.192.12 202.134.0.155 202.134.2.5
hosts_file /etc/hosts
# diskd_program /usr/lib/squid/diskd
# unlinkd_program /usr/lib/squid/unlinkd
# pinger_program /usr/lib/squid/pinger
# redirect_children 5
# redirect_rewrites_host_header on
#Recommended minimum configuration:
#auth_param digest program
#auth_param digest children 5
#auth_param digest realm Squid proxy-caching web server
#auth_param digest nonce_garbage_interval 5 minutes
#auth_param digest nonce_max_duration 30 minutes
#auth_param digest nonce_max_count 50
#auth_param ntlm program
#auth_param ntlm children 5
#auth_param ntlm max_challenge_reuses 0
#auth_param ntlm max_challenge_lifetime 2 minutes
#auth_param ntlm use_ntlm_negotiate off
#auth_param basic program
auth_param basic children 5
auth_param basic realm Squid proxy-caching web server
auth_param basic credentialsttl 2 hours
# authenticate_cache_garbage_interval 1 hour
# authenticate_ttl 1 hour
# authenticate_ip_ttl 0 seconds
# wais_relay_port 0
# request_header_max_size 10 KB
# request_body_max_size 0 KB
#Suggested default:
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern . 0 20% 4320
refresh_pattern -i ^ftp:// 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern . 180 95% 4320 override-lastmod reload-into-ims
refresh_pattern -i \.spinbox.net$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.tar.gz$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.mp3$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.zip$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.png$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.gif$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.jpg$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.jpeg$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.swf$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i /$ 2880 90% 4320 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /index.htm?$ 2880 90% 4320 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /welcome.htm$ 2880 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /default.htm$ 2880 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i \.(htm|html|cgi|asp|cfm)$ 2880 90% 86400 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.class$ 43200 90% 86400 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i ^ftp:// 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(gif|jp?g|xbm|png|swf|bmp)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(mov|avi|qtm|mp?)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(zip|exe|gz|Z|lha|arj)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern . 100080 90% 432000 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern ^gopher: 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
# TAG: quick_abort_pct (percent)
#Default:
# quick_abort_min 16 KB
# quick_abort_max 16 KB
quick_abort_pct 100
# negative_ttl 5 minutes
# positive_dns_ttl 6 hours
# negative_dns_ttl 1 minute
# range_offset_limit 0 KB
# forward_timeout 4 minutes
connect_timeout 1 minute
# peer_connect_timeout 30 seconds
# read_timeout 15 minutes
# request_timeout 5 minutes
# persistent_request_timeout 1 minute
# client_lifetime 1 day
# half_closed_clients on
# pconn_timeout 120 seconds
# ident_timeout 10 seconds
# shutdown_lifetime 30 seconds
#Examples:
#acl myexample dst_as 1241
#acl password proxy_auth REQUIRED
#acl fileupload req_mime_type -i ^multipart/form-data$
#acl javascript rep_mime_type -i ^application/x-javascript$
#
#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563 2083 2087 2096 4081
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#virus WMF
acl blockedtypereq req_mime_type -i ^application/x-msmetafile$
acl blockedtypereq req_mime_type -i application/x-msmetafile
acl blockedtyperep rep_mime_type -i ^application/x-msmetafile$
acl blockedtyperep rep_mime_type -i application/x-msmetafile
acl blocked_contdisp rep_header Content-Disposition -i .wmf
#antinya virus WMF
http_access deny blockedtypereq all
http_access deny blockedtyperep all
http_reply_access deny blocked_contdisp
# follow_x_forwarded_for deny all
#Default:
# acl_uses_indirect_client on
# delay_pool_uses_indirect_client on
# log_uses_indirect_client on
# http_access deny all
http_access allow manager localhost
http_access deny manager
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
acl kates arp "/etc/squid/mac/mac-user.txt"
#acl wedus src "/etc/squid/mac/ip.txt"
acl smp1 src 10.10.10.31
#---------------------------
#acl badomain dstdomain "/etc/squid/mac/domain.txt"
#http_access deny badomain
#---------------------------
#
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
# Example rule allowing access from your local networks. Adapt
# to list your (internal) IP networks from where browsing should
# be allowed
#acl our_networks src 192.168.1.0/24 192.168.2.0/24
#http_access allow our_networks
# And finally deny all other access to this proxy
http_access allow localhost
acl generic_browser browser Mozilla
acl generic_browser browser IE
http_access allow kates
#http_access allow wedus
#maksimal connection
#acl maksimal maxconn 4
#
http_access deny all
http_reply_access allow all
# icp_access deny all
icp_access allow all
# miss_access allow all
# ident_lookup_access deny all
# reply_header_max_size 20 KB
# reply_body_max_size 0 allow all
# cache_mgr root
cache_effective_user squid
cache_effective_group squid
visible_hostname localhost
# announce_period 0
# announce_host tracker.ircache.net
# announce_port 3131
httpd_accel_host virtual
httpd_accel_port 80
# httpd_accel_single_host off
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
# TAG: logfile_rotate
# Specifies the number of logfile rotations to make when you
# type 'squid -k rotate'. The default is 10, which will rotate
# with extensions 0 through 9. Setting logfile_rotate to 0 will
# disable the rotation, but the logfiles are still closed and
# re-opened. This will enable you to rename the logfiles
# yourself just before sending the rotate signal.
#
# Note, the 'squid -k rotate' command normally sends a USR1
# signal to the running squid process. In certain situations
# (e.g. on Linux with Async I/O), USR1 is used for other
# purposes, so -k rotate uses another signal. It is best to get
# in the habit of using 'squid -k rotate' instead of 'kill -USR1
#'.
#
#Default:
# logfile_rotate 0
# TAG: append_domain
# Appends local domain name to hostnames without any dots in
# them. append_domain must begin with a period.
#
# Be warned there are now Internet names with no dots in
# them using only top-domain names, so setting this may
# cause some Internet sites to become unavailable.
#
#Example:
# append_domain .yourdomain.com
#
#Default:
# none
# tcp_recv_bufsize 0 bytes
# memory_pools on
# TAG: memory_pools_limit (bytes)
# Used only with memory_pools on:
# memory_pools_limit 50 MB
#
# forwarded_for on
# log_icp_queries on
# icp_hit_stale off
# minimum_direct_hops 4
# minimum_direct_rtt 400
#Example:
# cachemgr_passwd secret shutdown
# cachemgr_passwd lesssssssecret info stats/objects
# cachemgr_passwd disable all
#
#Default:
# none
#cachemgr_passwd netsisfo all
# store_avg_object_size 13 KB
# store_objects_per_bucket 20
# client_db on
client_db on
# netdb_low 900
# netdb_high 1000
# netdb_ping_period 5 minutes
#query_icmp off
query_icmp on
# test_reachability off
# buffered_logs off
# reload_into_ims off
reload_into_ims on
#We don't want to limit downloads on our local network
acl magic_words1 url_regex -i 10.10.
#We want to limit downloads of these type of files
#Put this all in one line
acl pelem url_regex -i \.mp3$ \.rm$ \.mpg$ \.mpeg$ \.avi$ \.dat$ \.exe$ \.vqf$ \.tar.gz$ \.gz$ \.rpm$ \.zip$ \.rar$ \.mpe$ \.qt$ \.iso$ \.raw$ \.wav$ \.mov$ \.pdf$ \.wmv$ \.wam$ \.bin$ \.sis$ \.3gp$ \.7z$ \.tar$ \.bzip$
acl magic_words2 url_regex -i ftp .exe .mp3 .vqf .tar.gz .gz .rpm .zip .rar .avi .mpeg .mpe .mpg .qt .ram .rm .iso .raw .wav .mov .pdf .wmv .iso .wma .bin .3gp .sis .7z .tar .bzip
#.bmp .jpg .jpeg .gif .pdf .doc .xls .ppt
acl magic_words3 url_regex -i ftp .bmp .pdf .doc .xls .ppt .swf .fla
#acl kampes src 10.10.10.234
#acl day time 09:00-21:00
#We don't block .html, .gif, .jpg and similar files, because they
#generally don't consume much bandwidth
#We have two different delay_pools
delay_pools 3
#First delay pool
#W don't want to delay our local traffic
#There are three pool classes; here we will deal only with the second
delay_class 1 2
#-1/-1 mean that there are no limits
delay_parameters 1 -1/-1 -1/-1
#magic_words1: 192.168
delay_access 1 allow magic_words1
#Second delay pool
#we want to delay downloading files mentioned in magic_words2
delay_class 2 2
#The numbers here are values in bytes;
#we must remember that Squid doesn't consider start/stop bits
#5000/150000 are values for the whole network
#5000/120000 are values for the single IP
#after downloaded files exceed about 150000 bytes,
#(or even twice or three times as much)
#they will continue to download at about 5000 bytes/s
#delay_parameters 2 5000/150000 5000/12000
#delay_parameters 2 5000/120000 2000/12000
delay_parameters 2 8000/13000 100/15000
#delay_access 2 deny !day
delay_access 2 allow magic_words2
delay_access 2 allow pelem
delay_access 2 deny all
delay_class 3 2
delay_parameters 3 6000/13000 1000/4500
delay_access 3 allow magic_words3
delay_access 3 deny all
#delay_class 4 2
#delay_parameters 3 18000/110000 8000/22000
#delay_access 4 allow day
#delay_access 4 deny all
coredump_dir /var/spool/squid
client_persistent_connections on
server_persistent_connections on
ie_refresh off
http_port 3128
icp_port 3130
udp_incoming_address 0.0.0.0
udp_outgoing_address 255.255.255.255
#cache_peer 203.130.255.196 parent 3128 3130
cache_peer random.us.ircache.net sibling 3128 3130 login=cs-info@plasa.com:phowEfalsajrasu
#cache_peer 202.143.61.37 sibling 3128 3130 proxy-only
icp_query_timeout 0
maximum_icp_query_timeout 2000
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 8 MB
cache_swap_low 98
cache_swap_high 99
maximum_object_size 51200 KB
minimum_object_size 0 KB
maximum_object_size_in_memory 16 KB
ipcache_size 4096
ipcache_low 98
ipcache_high 99
fqdncache_size 1024
cache_replacement_policy heap LFUDA
memory_replacement_policy heap GDSF
cache_dir aufs /var/spool/squid 10000 32 256
cache_access_log /var/log/squid/access.log
cache_log /var/log/squid/cache.log
cache_store_log /var/log/squid/store.log
emulate_httpd_log on
log_ip_on_direct on
mime_table /etc/squid/mime.conf
pid_filename /var/run/squid.pid
debug_options ALL,1
log_fqdn off
client_netmask 255.255.255.255
ftp_user Squid@kates.com
ftp_list_width 48
ftp_passive on
ftp_sanitycheck on
ftp_telnet_protocol on
#cache_dns_program /usr/lib/squid/dnsserver
dns_timeout 5 minutes
dns_nameservers 10.10.10.1 202.134.1.10 61.94.192.12 202.134.0.155 202.134.2.5
hosts_file /etc/hosts
# diskd_program /usr/lib/squid/diskd
# unlinkd_program /usr/lib/squid/unlinkd
# pinger_program /usr/lib/squid/pinger
# redirect_children 5
# redirect_rewrites_host_header on
#Recommended minimum configuration:
#auth_param digest program
#auth_param digest children 5
#auth_param digest realm Squid proxy-caching web server
#auth_param digest nonce_garbage_interval 5 minutes
#auth_param digest nonce_max_duration 30 minutes
#auth_param digest nonce_max_count 50
#auth_param ntlm program
#auth_param ntlm children 5
#auth_param ntlm max_challenge_reuses 0
#auth_param ntlm max_challenge_lifetime 2 minutes
#auth_param ntlm use_ntlm_negotiate off
#auth_param basic program
auth_param basic children 5
auth_param basic realm Squid proxy-caching web server
auth_param basic credentialsttl 2 hours
# authenticate_cache_garbage_interval 1 hour
# authenticate_ttl 1 hour
# authenticate_ip_ttl 0 seconds
# wais_relay_port 0
# request_header_max_size 10 KB
# request_body_max_size 0 KB
#Suggested default:
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern . 0 20% 4320
refresh_pattern -i ^ftp:// 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern . 180 95% 4320 override-lastmod reload-into-ims
refresh_pattern -i \.spinbox.net$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.tar.gz$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.mp3$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.zip$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.png$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.gif$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.jpg$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.jpeg$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.swf$ 10080 90% 10080 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i /$ 2880 90% 4320 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /index.htm?$ 2880 90% 4320 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /welcome.htm$ 2880 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i /default.htm$ 2880 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern -i \.(htm|html|cgi|asp|cfm)$ 2880 90% 86400 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.class$ 43200 90% 86400 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i ^ftp:// 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(gif|jp?g|xbm|png|swf|bmp)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(mov|avi|qtm|mp?)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern -i \.(zip|exe|gz|Z|lha|arj)$ 21600 90% 43200 override-expire override-lastmod ignore-reload reload-into-ims
#refresh_pattern . 100080 90% 432000 override-expire override-lastmod ignore-reload reload-into-ims
refresh_pattern ^gopher: 1440 90% 172800 override-expire override-lastmod ignore-reload reload-into-ims
# TAG: quick_abort_pct (percent)
#Default:
# quick_abort_min 16 KB
# quick_abort_max 16 KB
quick_abort_pct 100
# negative_ttl 5 minutes
# positive_dns_ttl 6 hours
# negative_dns_ttl 1 minute
# range_offset_limit 0 KB
# forward_timeout 4 minutes
connect_timeout 1 minute
# peer_connect_timeout 30 seconds
# read_timeout 15 minutes
# request_timeout 5 minutes
# persistent_request_timeout 1 minute
# client_lifetime 1 day
# half_closed_clients on
# pconn_timeout 120 seconds
# ident_timeout 10 seconds
# shutdown_lifetime 30 seconds
#Examples:
#acl myexample dst_as 1241
#acl password proxy_auth REQUIRED
#acl fileupload req_mime_type -i ^multipart/form-data$
#acl javascript rep_mime_type -i ^application/x-javascript$
#
#Recommended minimum configuration:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563 2083 2087 2096 4081
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#virus WMF
acl blockedtypereq req_mime_type -i ^application/x-msmetafile$
acl blockedtypereq req_mime_type -i application/x-msmetafile
acl blockedtyperep rep_mime_type -i ^application/x-msmetafile$
acl blockedtyperep rep_mime_type -i application/x-msmetafile
acl blocked_contdisp rep_header Content-Disposition -i .wmf
#antinya virus WMF
http_access deny blockedtypereq all
http_access deny blockedtyperep all
http_reply_access deny blocked_contdisp
# follow_x_forwarded_for deny all
#Default:
# acl_uses_indirect_client on
# delay_pool_uses_indirect_client on
# log_uses_indirect_client on
# http_access deny all
http_access allow manager localhost
http_access deny manager
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
acl kates arp "/etc/squid/mac/mac-user.txt"
#acl wedus src "/etc/squid/mac/ip.txt"
acl smp1 src 10.10.10.31
#---------------------------
#acl badomain dstdomain "/etc/squid/mac/domain.txt"
#http_access deny badomain
#---------------------------
#
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
# Example rule allowing access from your local networks. Adapt
# to list your (internal) IP networks from where browsing should
# be allowed
#acl our_networks src 192.168.1.0/24 192.168.2.0/24
#http_access allow our_networks
# And finally deny all other access to this proxy
http_access allow localhost
acl generic_browser browser Mozilla
acl generic_browser browser IE
http_access allow kates
#http_access allow wedus
#maksimal connection
#acl maksimal maxconn 4
#
http_access deny all
http_reply_access allow all
# icp_access deny all
icp_access allow all
# miss_access allow all
# ident_lookup_access deny all
# reply_header_max_size 20 KB
# reply_body_max_size 0 allow all
# cache_mgr root
cache_effective_user squid
cache_effective_group squid
visible_hostname localhost
# announce_period 0
# announce_host tracker.ircache.net
# announce_port 3131
httpd_accel_host virtual
httpd_accel_port 80
# httpd_accel_single_host off
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
# TAG: logfile_rotate
# Specifies the number of logfile rotations to make when you
# type 'squid -k rotate'. The default is 10, which will rotate
# with extensions 0 through 9. Setting logfile_rotate to 0 will
# disable the rotation, but the logfiles are still closed and
# re-opened. This will enable you to rename the logfiles
# yourself just before sending the rotate signal.
#
# Note, the 'squid -k rotate' command normally sends a USR1
# signal to the running squid process. In certain situations
# (e.g. on Linux with Async I/O), USR1 is used for other
# purposes, so -k rotate uses another signal. It is best to get
# in the habit of using 'squid -k rotate' instead of 'kill -USR1
#
#
#Default:
# logfile_rotate 0
# TAG: append_domain
# Appends local domain name to hostnames without any dots in
# them. append_domain must begin with a period.
#
# Be warned there are now Internet names with no dots in
# them using only top-domain names, so setting this may
# cause some Internet sites to become unavailable.
#
#Example:
# append_domain .yourdomain.com
#
#Default:
# none
# tcp_recv_bufsize 0 bytes
# memory_pools on
# TAG: memory_pools_limit (bytes)
# Used only with memory_pools on:
# memory_pools_limit 50 MB
#
# forwarded_for on
# log_icp_queries on
# icp_hit_stale off
# minimum_direct_hops 4
# minimum_direct_rtt 400
#Example:
# cachemgr_passwd secret shutdown
# cachemgr_passwd lesssssssecret info stats/objects
# cachemgr_passwd disable all
#
#Default:
# none
#cachemgr_passwd netsisfo all
# store_avg_object_size 13 KB
# store_objects_per_bucket 20
# client_db on
client_db on
# netdb_low 900
# netdb_high 1000
# netdb_ping_period 5 minutes
#query_icmp off
query_icmp on
# test_reachability off
# buffered_logs off
# reload_into_ims off
reload_into_ims on
#We don't want to limit downloads on our local network
acl magic_words1 url_regex -i 10.10.
#We want to limit downloads of these type of files
#Put this all in one line
acl pelem url_regex -i \.mp3$ \.rm$ \.mpg$ \.mpeg$ \.avi$ \.dat$ \.exe$ \.vqf$ \.tar.gz$ \.gz$ \.rpm$ \.zip$ \.rar$ \.mpe$ \.qt$ \.iso$ \.raw$ \.wav$ \.mov$ \.pdf$ \.wmv$ \.wam$ \.bin$ \.sis$ \.3gp$ \.7z$ \.tar$ \.bzip$
acl magic_words2 url_regex -i ftp .exe .mp3 .vqf .tar.gz .gz .rpm .zip .rar .avi .mpeg .mpe .mpg .qt .ram .rm .iso .raw .wav .mov .pdf .wmv .iso .wma .bin .3gp .sis .7z .tar .bzip
#.bmp .jpg .jpeg .gif .pdf .doc .xls .ppt
acl magic_words3 url_regex -i ftp .bmp .pdf .doc .xls .ppt .swf .fla
#acl kampes src 10.10.10.234
#acl day time 09:00-21:00
#We don't block .html, .gif, .jpg and similar files, because they
#generally don't consume much bandwidth
#We have two different delay_pools
delay_pools 3
#First delay pool
#W don't want to delay our local traffic
#There are three pool classes; here we will deal only with the second
delay_class 1 2
#-1/-1 mean that there are no limits
delay_parameters 1 -1/-1 -1/-1
#magic_words1: 192.168
delay_access 1 allow magic_words1
#Second delay pool
#we want to delay downloading files mentioned in magic_words2
delay_class 2 2
#The numbers here are values in bytes;
#we must remember that Squid doesn't consider start/stop bits
#5000/150000 are values for the whole network
#5000/120000 are values for the single IP
#after downloaded files exceed about 150000 bytes,
#(or even twice or three times as much)
#they will continue to download at about 5000 bytes/s
#delay_parameters 2 5000/150000 5000/12000
#delay_parameters 2 5000/120000 2000/12000
delay_parameters 2 8000/13000 100/15000
#delay_access 2 deny !day
delay_access 2 allow magic_words2
delay_access 2 allow pelem
delay_access 2 deny all
delay_class 3 2
delay_parameters 3 6000/13000 1000/4500
delay_access 3 allow magic_words3
delay_access 3 deny all
#delay_class 4 2
#delay_parameters 3 18000/110000 8000/22000
#delay_access 4 allow day
#delay_access 4 deny all
coredump_dir /var/spool/squid
client_persistent_connections on
server_persistent_connections on
ie_refresh off
Subscribe to:
Posts (Atom)