Mandriva 2010 : Telkomsel Flash With KPPP

Jalankan kppp

Pilih Configure

Pilih Account > New > Manual Setup

Connection Name : isi sembarang, misal telkomsel

Phone Number > Add, isi *99#

Klik OK

Pilih Modem > New > Device

Modem Name : nokia

Modem Device : /dev/ttyACM0

Connection Speed : 460800

Trus pilih tab Modem

klik Modem Command

Initialization string 1 : AT+CGDCONT=1,”IP”,”internet”

Klik OK

Trus cek, dengan Query Modem. Pastikan Modem/HP sudah di colokkan ke USB komputer

Kalo sudah terdeteksi, silahkan klik OK dan OK sampe ke window kppp awal.

Kemudian lakukan dial, isi

Login ID isi dengan '' tanda petik 1, 2kali, alias di kosongi

Password isi dengan '' tanda petik 1, 2kali, alias di kosongi


Mangap... skrinsut nyusul...

Mandriva 2010 : Telkomsel Flash With Wvdial

Dial up using GSM Provider (Telkomsel) with Nokia 5320

Set Nokia 5320 to PC Suite
setting > phone setting > connection > usb > pc suite

Install wvdial

urpmi wvdial

Configuring wvdial

wvdialconf

[root@srempuan box]# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Nokia
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
/etc/wvdial.conf: Can't open '/etc/wvdial.conf' for reading: No such file or directory
/etc/wvdial.conf: ...starting with blank configuration.
Modem configuration written to /etc/wvdial.conf.
ttyACM0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
[root@srempuan box]#

and check the configuration file in /etc/wvdial.conf

[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
; Phone =
ISDN = 0
; Username =
Init1 = ATZ
; Password =
Modem = /dev/ttyACM0
Baud = 460800
/etc/wvdial.conf lines 1-11/11 (END)

for telkomsel flash change to :

[Dialer Defaults]
Modem Type = USB Modem
Modem = /dev/ttyACM0
Baud = 460800
Init2 = AT+CGDCONT=1,"IP","internet"
Phone = *99#
Username = 'telkomsel'
Password = 'telkomsel'
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Idle Seconds = 3000
ISDN = 0
Auto DNS = 1

Lets run it

[box@srempuan ~]$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Idle Seconds = 3000, disabling automatic reconnect.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Tue Jan 12 08:05:35 2010
--> Pid of pppd: 27238
--> Using interface ppp0
--> pppd: Connect: ppp0 <--> /dev/ttyACM0
--> pppd: PAP authentication succeeded
--> pppd: not replacing existing default route via 192.168.1.1
--> local IP address 114.120.155.152
--> remote IP address 10.6.6.6
--> primary DNS address 114.127.208.84
--> secondary DNS address 202.3.208.11


To Disconnect, hit Ctrl+C

Bayu Cinta Luna

Karena Ku Cinta Kau